---
title: "Granular Access Control: Per-Group, Per-Folder, Per-File Permissions"
lang: en
canonical_url: https://www.peony.ink/docs/features/security/granular-access-control
description: "How to set folder-level and file-level permissions per user group in a Peony virtual data room: the four levels (No access, View, Download, Upload), how to revoke access, and why nothing applies until you click Save."
---

Granular access control is how one Peony data room serves several audiences at once — investors, buyers, and your own advisors reading the same virtual data room and each seeing a different subset of it. Every group gets its own security stack and its own permission table, and inside that table you set **No access**, **View**, **Download**, or **Upload** on any folder or any individual file. Nothing takes effect until you click **Save**.

## Where to Set Permissions

Open the data room and click **Permissions** in the left sidebar. That one screen holds everything on this page.

![Peony data room with the left sidebar showing Documents, Analytics, Audit trail, Q&A, Permissions, and Settings — Permissions highlighted](https://www.peony.ink/docs/granular-access-control/permissions-tab-location.png)

The **Permissions** screen has two halves: a **Groups** column on the left, and the selected group's settings on the right under a **Security** tab and a **Visitors** tab.

## Permissions Are Set Per Group

A group is a named audience — "Target Management", "Due Diligence Advisor", "Investor A". Each row in the **Groups** column carries its own **Copy access link**, a **Resend invite to N** shortcut, and an on/off toggle, so you can arm, share, or kill one audience without touching the others. **Create new group** at the bottom of the column adds another.

![Permissions screen with the Groups column listing Target Management, Due Diligence Advisor, Financial Advisor and three investor groups, next to the group's Security control cards and Permissions table](https://www.peony.ink/docs/granular-access-control/per-group-security-and-permissions.png)

Select a group and the **Security** tab shows two stacked sections:

- **Security control** — "Enhance safety and customize advanced security controls for this group in the data room." Independent cards for **Password protection**, **Expiry**, **Dynamic watermark**, **One-click NDA**, **Screenshot protection**, **Access questions**, **AI document Q&A**, and **Appearance**, each showing its current state under the label (`Off`, `Never`, `On`, `Theme only`). The exact set is dynamic — **Email-gated access** appears only on Link access groups.
- **Permissions** — "Choose which folders and files this group can access, download, or upload into." The document tree with a permission slider on every row.

Because both sections live inside the group, two audiences can read the same room under completely different rules: buyers get an NDA gate and a watermark on a trimmed folder tree, your own advisors get the full tree with downloads on.

**Create a new group whenever an audience needs different permissions** — a different NDA, a different watermark, or a different set of visible folders. Groups also separate analytics and make revocation clean. See [Permission & Security Settings](https://www.peony.ink/docs/getting-started/permissions-and-security-settings) for the full set of security controls.

## Hide New Content by Default
By default, a file or folder you upload inherits access from every existing group, so everyone who could see the room can see it the moment it lands. To flip the default, turn on **Hide new content by default** <Plan>Deal Team+</Plan> in the data room's **Settings** tab. New files and folders then stay hidden from every sharing link until you grant access in **Permissions**, group by group.

It only changes content added after you turn it on. Full steps: [Hide new content by default](https://www.peony.ink/docs/features/security/hide-new-content-by-default).

## The Four Permission Levels: No Access, View, Download, Upload

The **Permissions** table lists the room's folder tree under a **Documents** header, with four levels across the top: **No access**, **View**, **Download**, **Upload**. Every row has its own four-position slider, and the highlighted segment is the level that row currently grants.

![The Permissions table with the four column headers No access, View, Download and Upload highlighted, and sliders set per folder and per file](https://www.peony.ink/docs/granular-access-control/four-permission-levels.png)

| Level | Visible | Open in browser | Save a copy | Add files |
| --- | --- | --- | --- | --- |
| **No access** | No | No | No | No |
| **View** | Yes | Yes | No | No |
| **Download** | Yes | Yes | Yes | No |
| **Upload** | Yes | Yes | Yes | Yes (folders only) |

A folder or file at **No access** is absent from the group's view of the room, not greyed out, so a file name alone can never leak. **Upload applies to folders only**; on a file row the Upload segment is struck through and cannot be selected.

The levels are inclusive, not four separate switches: **Download** also grants **View**, and **Upload** grants all three. There is no upload-only drop box — a group that can upload into a folder can also read it.

### Printing
There is no separate print switch in the permissions table: printing follows the **Download** level. Set a folder or file to **View** or **No access** and printing is disabled along with downloading on most common formats and modern devices. It can't be guaranteed on every device and file format, so keep a **Dynamic watermark**, a **One-click NDA**, or both on for sensitive material. See [Stop visitors from printing](https://www.peony.ink/docs/features/security/stop-visitors-printing).

### Per-Folder Permissions

<Video id="UJY42FdZQU0" title="How to set view, download or upload per folder" />

Every folder in the tree — **Commercial Due Diligence**, **Financial & Tax Due Diligence**, **HR Due Diligence**, and so on — gets its own slider. Set the top-level room row to grant a baseline for the whole tree, then override individual folders below it. Children inherit the parent folder's level unless you set them explicitly.

The usual M&A pattern: **View** on the whole tree, **Download** on the teaser only, **No access** on customer lists and cap tables until an LOI is signed.

### Per-File Permissions

<Video id="_AyO2Atf_8w" title="How to restrict one file inside a folder" />

Click the chevron next to a folder to expand it and the individual files appear as their own rows — `Summary Financial Statements FY2023-FY2025.pdf`, `Tax Compliance Summary.pdf` — each with its own slider. That is how you let a group download most of a folder while one sensitive file stays at **View**.

A file's own setting wins over the folder it sits in, so you do not have to restructure the room to protect a single document.

## Revoking Access to a File, a Folder, or a Whole Group
There is no separate "revoke" button. Revocation is the **No access** level on a file or folder, a person removed from a group's **Visitors** tab, or a group switched off in the **Groups** column. Changes apply the next time the viewer opens or refreshes the room. Permission changes apply only after you click **Save**; removing a person from an existing group's **Visitors** list saves on its own. Steps for each case: [Revoke access](https://www.peony.ink/docs/features/security/revoke-access).

## You Must Click Save

<Callout type="warning" title="Nothing applies until you click Save">

Nothing you change on this screen takes effect until you click **Save** at the bottom right. Sliders, toggles, and security cards all update the form only. Moving a slider does not write anything to the room. The one exception is the email list under **People with access** on an existing group, which saves on its own.

</Callout>

This is the single most common "my permissions didn't work" ticket. The failure looks exactly like a bug: you set a folder to **No access**, navigate to another group or close the panel, come back, and the folder is visible again. It was never saved.

Three habits that avoid it:

- **Save before you switch groups.** Selecting a different group in the **Groups** column discards unsaved changes on the current one.
- **Save before you leave the Permissions tab.** **Cancel** sits next to **Save** and is easy to hit on the way out.
- **Verify from the viewer side.** Open the group's access link in an incognito window and confirm the tree matches what you intended.

## Messages When Saving

- **This link changed somewhere else while you were editing. Refresh to load the latest settings, then apply your changes again.** Someone else saved this link first. Refresh and redo your change.
- **This link would store N permission entries, above the limit of N. Remove some entries and try again.** Your change adds more per-item settings than one link can hold. Set the level on a parent folder instead of on many items inside it.
- **This link stores N permission entries, above the N this editor can load. Permissions can't be changed here.** The editor is read-only for this link. [Contact support](https://www.peony.ink/docs/troubleshooting/contact-support).

## Pricing

Per-group, per-folder and per-file permissions, plus the **Upload** level: <Plan>Data Room+</Plan>. **Free** and **Business** — link-level **View** / **Download** defaults only. A [7-day Data Room trial](https://www.peony.ink/docs/account-billing/trial) lets you test the permission table before you buy. See [Plans and Pricing](https://www.peony.ink/docs/account-billing/plans-and-pricing).

## Common Mistakes

- **Not clicking Save.** See the section above — it is the top cause of permissions that appear not to apply.
- **Reusing one group for every audience.** You lose per-group analytics, and revoking one viewer hits everyone else in the group.
- **Assuming a new folder is hidden.** A folder you add inherits access from every existing group, unless **Hide new content by default** is on in the room's Settings. Either turn that on or set the folder to **No access** per group. See [Hide New Content by Default](#hide-new-content-by-default).
- **Relying on security controls to hide files.** Watermarks, NDAs, and screenshot protection do not limit _which_ files a group sees. Only the **Permissions** table does that.
- **Leaving Download on while expecting the watermark to hold.** Pair [Dynamic Watermarks](https://www.peony.ink/docs/features/security/dynamic-watermarks) with the file set to **View**.

## Common Questions

#### How do I give two investors access to different folders in the same data room?

Put each investor in its own group on the **Permissions** tab, then set that group's folder tree independently. Both open the same room and each sees only the folders you granted them — you do not need a second data room, and neither investor can tell what the other was shown.

#### I moved the slider and it reverted. Why?

The change was not saved. Click **Save** at the bottom right before switching groups or leaving the **Permissions** tab — **Cancel** discards everything.

#### Can one file be more restricted than the folder around it?

Yes. Expand the folder, and set that file's own slider. The file-level setting wins over the folder's.

#### Does No access hide the file, or show it locked?

It hides it. A folder or file at **No access** is not in that group's view of the room at all.

#### Can I stop visitors from printing a document?

Set the file or folder to **View** (or **No access**). Printing follows the **Download** level, so there is no separate print setting. See [Stop visitors from printing](https://www.peony.ink/docs/features/security/stop-visitors-printing) for what that does and doesn't guarantee.

#### Why can't I set Upload on a file?

**Upload** is a folder-level permission — it means "add files into this folder", so it has no meaning on a single file. The segment is struck through on file rows.

#### Can a group upload files without being able to read what's already in the folder?

No. The levels are inclusive, so **Upload** also grants **View** and **Download** on that folder. If you need a collection point nobody can read back, use a separate folder that holds nothing else.

#### Do these permissions carry across data rooms?

No. Groups and their permission tables are scoped to a single data room, so an audience that needs access to two rooms is created in each.

#### How do visitors download a file?
They open the file and click the download icon in the top-right corner of the viewer. If there's no download icon, their group is set to **View** for that file or folder — switch it to **Download** here.

## Next Steps

- [Permission & Security Settings](https://www.peony.ink/docs/getting-started/permissions-and-security-settings) — access modes, groups, and the full security stack
- [Access Control Layers](https://www.peony.ink/docs/concepts/access-control-layers) — which controls to stack for each use case
- [Dynamic Watermarks: Setup and Limits](https://www.peony.ink/docs/features/security/dynamic-watermarks)
- [NDA Gates: Signed Before Access](https://www.peony.ink/docs/features/security/nda-gates)
- [Admins vs Viewers](https://www.peony.ink/docs/concepts/admins-vs-viewers)
- [Revoke access](https://www.peony.ink/docs/features/security/revoke-access)
- [Set or change a link expiry](https://www.peony.ink/docs/features/security/set-link-expiry)

---

_Markdown version of [https://www.peony.ink/docs/features/security/granular-access-control](https://www.peony.ink/docs/features/security/granular-access-control.md) for AI agents and LLMs; canonical HTML: https://www.peony.ink/docs/features/security/granular-access-control. Every page on peony.ink is available as markdown — append `.md` to the URL or request it with `Accept: text/markdown`. More: [llms.txt](https://www.peony.ink/llms.txt)._
