---
title: "Permission & Security Settings"
lang: en
canonical_url: https://www.peony.ink/docs/getting-started/permissions-and-security-settings
description: "Configure who opens your Peony data room and what they can see. Choose Email access or Link access, stack the security controls per group, and set per-folder permissions."
---

Peony gates every data room at two levels: **who can open it** (access mode) and **what they can do inside** (security controls + folder-level permissions). You configure all of it per **group** — a named audience like "Series A investors" or "Buyer: Acme Corp."

For maximum control, use **Email access** with individual emails. For speed, use **Link access** with email gating. Either way, the same security controls apply.

> **Sharing a data room is covered in three pages.** [Share your data room](https://www.peony.ink/docs/getting-started/share-a-data-room-link) is the whole flow, start to finish. [Invite visitors](https://www.peony.ink/docs/getting-started/invite-viewers) covers email invitations: adding people, the invitation email, resending and removing someone. [Set email, password or link access](https://www.peony.ink/docs/getting-started/permissions-and-security-settings) covers the two access modes and every security control.

## Where This Lives

Open any data room and click the **Permissions** tab in the left sidebar. That's the one screen for the whole room: a **Groups** list on the left (each with a per-group toggle, a **Copy access link** shortcut, and a **Create new group** button), and the selected group's settings on the right.

![Permissions tab with the Groups sidebar and the group wizard on step 1, Visitors, with Email access selected](https://www.peony.ink/docs/permissions-and-security/permissions-wizard-visitors.png)

To create or edit a group you step through a short wizard:

- **Visitors** (step 1) — the audience: group name, access mode, and who's in it.
- **Document permissions** (step 2) — the per-folder and per-file access table for that group.

You can also share a whole room in one click from the **Share securely** button in the top bar — it spins up a default group and drops you into the same wizard.

<Callout type="note" title='One word "Settings", two surfaces'>

The **Permissions** tab covers everything on this page. The per-room **Settings** tab (cover image, logo, index documents, notifications) and your **workspace settings** (bottom-left of the home screen — billing, admins, org name) are separate. When a support answer says "Settings", check which one it means.

</Callout>

## Two Access Modes

On the **Visitors** step you pick the access mode:

### Email access (recommended for deals)

You enter each allowed email (or domain). Only those recipients receive an invitation email; everyone else is blocked by default. Use this for fundraising, M&A, diligence — any time you need a clean audit trail of who got the invite. Adding people, the invitation email and resending it are covered step by step in [Invite visitors](https://www.peony.ink/docs/getting-started/invite-viewers).

### Link access

Peony generates one share link for the group. You send it via any channel; anyone with the URL attempts access. Use this for high-volume distribution — paid newsletters, open investor updates, conference attendees — and layer [email gating](https://www.peony.ink/docs/getting-started/email-gated-access) on top so you still know who opened it. Grab the link with **Copy access link** on the group.

![An existing group open on the Visitors tab with the Link access radio selected](https://www.peony.ink/docs/permissions-and-security/link-access-mode.png)

**Rule of thumb:** If you know the recipients, use Email access. If you don't, use Link access with email gating on.

<Callout type="warning" title="Switching modes drops the emails you typed">

We don't recommend flipping one group between Email access and Link access — toggling the mode can clear the viewer emails you'd already entered. If you need both, create a second group instead of re-using one.

</Callout>

## The Security Controls (Both Modes)

<Video id="_TBjYKFTCyw" title="How to put a password on a link" />

<Video id="B3Nm_2fEyBo" title="How to ask visitors questions before they enter" />

Inside a group you'll see the **Security control** panel. The set of cards is dynamic — **Email-gated access** appears only in Link access mode, and **AI document Q&A** appears only for AI-enabled folders — but the core controls are the same in both modes. Each is independent; toggle what you need.

| Control | What it does | Plan | More |
| --- | --- | --- | --- |
| **Password protection** | Optional shared password, sent out-of-band (Signal, phone). | <Plan>All plans</Plan> | |
| **Expiry** | Auto-revoke access on a date you pick. | <Plan>All plans</Plan> | |
| **Dynamic watermark** | Viewer email + IP overlaid on every page. | <Plan>Data Room+</Plan> | [Dynamic Watermarks](https://www.peony.ink/docs/features/security/dynamic-watermarks) |
| **One-click NDA** | Upload a PDF for acknowledgment or select a template for e-signature. | <Plan>Business+</Plan>, e-signature <Plan>Data Room+</Plan> | [NDA Gates](https://www.peony.ink/docs/features/security/nda-gates) |
| **Screenshot protection** | Blocks desktop captures and logs attempts. | <Plan>Business+</Plan>, Advanced (Screenshield) <Plan>Data Room+</Plan> | [Screenshot Protection](https://www.peony.ink/docs/features/security/screenshot-protection) |
| **Access questions** | Custom questions the viewer answers before entry (e.g. "Which fund are you from?"). | <Plan>Data Room+</Plan> | |
| **AI document Q&A** | Allow or disable in-room AI search for this group (shown for AI-enabled folders). | <Plan>Business+</Plan>, not during the trial | [Turn on AI chat for visitors](https://www.peony.ink/docs/features/ai/ai-qa#turn-on-ai-chat-for-visitors) |
| **Appearance** | A group-specific theme plus an optional welcome message. | Custom logo and welcome message <Plan>Business+</Plan>, custom domain <Plan>Data Room+</Plan> | [Custom Branding](https://www.peony.ink/docs/features/branding/custom-branding) |

(The room's cover image is a separate control — the **Show cover image** card on the per-room **Settings** tab, noted in the callout above — not part of the group's Appearance card.)

<Callout type="note" title="Why some links ask for a name and others only an email">

Viewers are asked for their name, not just their email, when the link has **One-click NDA** turned on or a **Dynamic watermark** that displays names — both settings need the viewer's name to work. Turning off **Access questions** doesn't change this, so if some of your links ask for a name and others don't, check whether those links have either setting on. There's no option yet to require a name on every link. If you need one, email [sean@peony.ink](mailto:sean@peony.ink).

</Callout>

<Callout type="tip" title="Why a higher-tier feature triggers an upgrade prompt">

If a save is blocked, the message starts **Can't save:** and names each feature and the plan it needs, for example *The Dynamic watermark feature requires the Data Room plan. Upgrade to Data Room or disable it.* Turn off the feature it names and the rest of your settings save on your plan.

</Callout>

## Granular Folder & File Permissions

Open the group's **Document permissions** step (wizard step 2). It lets you set **No access / View / Download / Upload** for every folder and file in the room — per group. For the full walkthrough of that table — what each of the four levels grants, how per-file overrides work, and how to revoke — see [Granular Access Control](https://www.peony.ink/docs/features/security/granular-access-control).

<Callout type="note" title="Tier note">

View / Download link-level defaults are available on lower tiers. Granular per-folder and per-file permissions — and the Upload level — need <Plan>Data Room+</Plan>. That's the plan you need when different parties must each see a different subset of the same room.

</Callout>

Typical M&A pattern: give Tier-1 buyers View on the full tree plus Download on the teaser, but No access on customer lists until LOI. Use the slider under each row to choose the level. Children inherit the parent folder's setting unless you override them.

<Callout type="warning" title="New folders default to visible for every group">

When you add a folder, it inherits access from all existing groups, and you toggle it off per group. To make new uploads start hidden instead, turn on **Hide new content by default** <Plan>Deal Team+</Plan> in the room's **Settings** tab; see [Hide New Content by Default](https://www.peony.ink/docs/features/security/hide-new-content-by-default). If you need hard separation, split the content into a separate data room instead.

</Callout>

### Blocking downloads: two different controls

There are two distinct download controls, and support tickets often confuse them:

- **The per-folder Download level** (in the Document permissions table above) sets whether a group can download a specific folder or file. Drop a file to **View** or **No access** to stop that group downloading it.
- **The Allow downloads toggle** (in the link's settings) is a room-wide download switch. On Free it shows a **Requires Business plan** badge — turning downloads _off_ (download prevention) is a Business-tier feature.

To stop investors downloading, say, your SAFEs: refresh the room, then set those files to **View** in the Document permissions table for that group.

## Groups: The Permission Container

Groups are Peony's unit of permissioning. Each group has its own security stack, visitor list, and folder permissions. A group's visitor list can be anything from one person to dozens — you decide.

**Create a new group whenever an audience needs different permissions from another** — different NDA, different watermark, different folders visible. Different VCs, different buyer firms, different LPs typically each get their own group, which gives you independent security settings, separate analytics per group, and clean revocation. A group lives inside one data room, so the same audience is re-created in each room. For the steps, how many groups to create when several parties bid, and tailoring a version for one person, see [Create a group](https://www.peony.ink/docs/getting-started/create-a-group).

### Rename a group that still shows the template name

<Video id="mit2og7mW-0" title="How to rename a group" />

Group and link names are edited on the **Visitors** step, not in Settings. Open the group, change the name there, and **Save** (bottom right). The visitor-facing room name is edited the same way.

## Domain Gating

<Video id="fRJDqKOANIw" title="How to give a whole company access" />

In **Email access**, the **People with access** input on the Visitors step accepts either a full email (`investor@fund.com`) or a bare domain (`fund.com`). Enter a domain and anyone with an address at that domain can accept the invite. Domain gating (entering a bare domain rather than individual emails) is a **Data Room tier and up** feature — on Free or Business, adding a domain returns the toast "Domain-restricted access requires a Data Room plan". Individual emails work on every plan.

Useful for enterprise diligence where the buyer's deal team is large and not fully named yet. **For higher security, stick to individual emails** — everyone not listed is blocked by default, and you keep a per-person audit trail.

<Callout type="note" title="Custom invite email">

Email access groups can send your own invitation (subject, logo and body, with a live preview) <Plan>Deal Team+</Plan>. See [The invitation email](https://www.peony.ink/docs/getting-started/invite-viewers#the-invitation-email).

</Callout>

## Link Access Adds a 9th Control: Email-gated access

Switch the group to **Link access** and one more card appears in the Security control panel: **Email-gated access**. It holds four toggles, **Require viewer info**, **Verify email**, **Allow list** and **Block list**, and the best practice for link-shared rooms is to turn on the **Allow list** so a forwarded link can't be opened by anyone you didn't intend. Which plan each toggle needs, and how to fill the list with a CSV import, is in [Email-gated access](https://www.peony.ink/docs/getting-started/email-gated-access).

### Email access vs Link access + Email gating

This is the question most teams get wrong:

|                                      | **Email access**                | **Link access + Email gate ON**                |
| ------------------------------------ | ------------------------------- | ---------------------------------------------- |
| Who receives the invitation email?   | Only the emails you list        | Nobody — you send the URL yourself             |
| Default behavior for unlisted emails | **Blocked**                     | **Allowed** (unless on block list)             |
| Audit trail of invitees              | Yes, you listed them            | No — you only see who opened                   |
| Best for                             | Deals with named counterparties | Broad distribution (newsletters, teaser decks) |

Both capture the viewer's email for watermarks and analytics. The difference is the default: **Email access denies everyone but the list. Link access allows everyone but the block list.** Note that in Email access mode Peony emails each recipient an invitation; in Link access mode no one is notified — you send the link yourself.

**For anything sensitive, use Email access.** Use Link access only when reach matters more than a clean list.

## Removing or Reviewing Access

You take access back by removing a person from a group's **Visitors** step, blocking an email on a Link access group, switching a group off, or setting a file or folder to **No access**. Every case, step by step, is in [Revoke access](https://www.peony.ink/docs/features/security/revoke-access). See also [Remove someone](https://www.peony.ink/docs/getting-started/invite-viewers#remove-someone).

## Saving Your Changes

Hit **Save** (bottom right) after editing a group's Security settings, its name, or the Visitors step of a new group. Not clicking it is the most common "my changes disappeared" cause. On a group that already exists, adding or removing an email under **People with access** saves on its own, and added emails trigger invitation emails immediately. Toggle changes apply the next time any viewer opens the room.

## Common Mistakes

- **Reusing one group for every audience.** You lose per-group analytics and one viewer's revocation affects the rest. Create a group per audience.
- **Link access without email gating.** Anyone with the URL walks in. At minimum toggle **Require viewer info** (and **Verify email** on Business+).
- **NDA on, but configured on the wrong group.** NDA gates are per-group. Toggle it on the group you're actually about to share.
- **Ignoring folder permissions.** Security controls don't limit which files the group sees. Use the **Document permissions** table to hide folders per group.
- **Leaving downloads on while expecting the watermark to hold.** Pair watermarks with the file set to **View** in the Document permissions table.

## Common Questions

#### Do viewers need a Peony account?
No. Viewers never sign up. They enter their email at the gate, click the sign-in link (or enter the code) Peony emails them if verification is on, and read the room in the browser. Viewer access is free and unlimited on every plan.

#### Can I watermark differently per group?
Yes. Watermark is a per-group setting in the Security control panel (Data Room tier and up). Turn it on for external buyers, off for your internal team group.

## Next Steps

- [Share your data room](https://www.peony.ink/docs/getting-started/share-a-data-room-link) — the whole sharing flow
- [Invite visitors](https://www.peony.ink/docs/getting-started/invite-viewers) — email invitations, the invitation email, resending
- [Granular Access Control](https://www.peony.ink/docs/features/security/granular-access-control) — the four permission levels, per-folder and per-file overrides, and revoking access
- [Email-gated access](https://www.peony.ink/docs/getting-started/email-gated-access) — verify emails, allow list and block list on a Link access group
- [Create a group](https://www.peony.ink/docs/getting-started/create-a-group)
- [Access Control Layers](https://www.peony.ink/docs/concepts/access-control-layers) — which controls to stack for each use case
- [Dynamic Watermarks](https://www.peony.ink/docs/features/security/dynamic-watermarks)
- [NDA Gates](https://www.peony.ink/docs/features/security/nda-gates)
- [Screenshot Protection](https://www.peony.ink/docs/features/security/screenshot-protection)

---

_Markdown version of [https://www.peony.ink/docs/getting-started/permissions-and-security-settings](https://www.peony.ink/docs/getting-started/permissions-and-security-settings.md) for AI agents and LLMs; canonical HTML: https://www.peony.ink/docs/getting-started/permissions-and-security-settings. Every page on peony.ink is available as markdown — append `.md` to the URL or request it with `Accept: text/markdown`. More: [llms.txt](https://www.peony.ink/llms.txt)._
